Equipment rarely stops without warning. The signs show up first: a system that runs longer than it used to, a room that never quite reaches the temperature on the thermostat, a utility bill that climbs without any obvious cause. In a town like Montgomery, where homes often carry older equipment and additions that were never properly tied into the ductwork, those early signals matter. Acting on them before the system fails entirely is almost always the cheaper path.
We handle heating and cooling work across Montgomery and the surrounding area, available every day from 8:30 AM to 10:00 PM.
Whether you are dealing with a system that has been limping along for a season too long or equipment that stopped working entirely, call (912) 742-8959 and we will talk through what is happening before anything is scheduled.
Second opinions are a normal part of this trade. If a system was worked on recently and the problem has come back, that is not a reason to avoid calling. It is exactly the kind of situation where a fresh look at the equipment is worth the most.
We take over mid-job work and systems that have had repairs that did not resolve the underlying fault. When a previous fix addressed a symptom rather than the cause, the same symptom returns. We go back to the diagnostic step, look at what was done, and figure out what was missed. That conversation happens on the phone before the visit is confirmed, so you know what the visit is actually for.
A dirty evaporator coil is one of the most common reasons a system runs constantly without keeping up. The coil sits inside the air handler and pulls heat out of the air passing over it. When it is coated in dust or debris, it cannot transfer heat efficiently, and the system compensates by running longer. If the coil has developed a leak, refrigerant escapes and performance drops further. Cleaning and leak diagnosis are both part of what a coil service visit covers.
A sound that was not there last season is the equipment telling you something has changed. Banging or clanking at startup usually points to a mechanical problem inside the air handler or compressor. A high-pitched squeal often means a motor bearing is wearing out. Rattling that only happens during the first few minutes of a cycle is a different problem from rattling that continues throughout. We ask about the timing and character of the noise on the phone because that narrows down the cause before anyone has looked at the unit.
A room added to a home without a proper duct extension is one of the most common comfort complaints in older residential properties. The existing system was sized for the original footprint, and the new space either gets no airflow or pulls unevenly from the rest of the house. Designing ductwork for an addition means calculating what the space needs and figuring out where in the existing system that supply can come from without starving other rooms.
A home that has never had central air, or one where the existing system is being replaced entirely, starts with a load calculation. Humidity, sun exposure and insulation all change how a system should be sized, and in this region those variables carry more weight than the square footage alone. We walk through equipment options on the call and explain what each one means for the space before anything is scheduled.
A system that starts, runs for a few minutes, and shuts off before reaching temperature is short-cycling. It wastes energy, puts stress on the compressor, and leaves the space uncomfortable. The cause can be an oversized unit, a refrigerant issue, a dirty filter restricting airflow, or a control fault. Each of those is a different repair, which is why the diagnostic step comes before any parts discussion.
Boilers are uncommon in this region, but some older properties carry them. A boiler heats the living space through radiators or in-floor loops, and the service work involves the heat exchanger, the circulator pump, the expansion tank, and the controls. We handle boiler service for properties that have them. This is space-heating equipment, not domestic water heating, and the two are separate systems even when they share a fuel source.
A high-efficiency rating on a unit is a number measured under controlled test conditions. What a property actually sees depends on how well the system is matched to the space, how the ductwork performs, and whether the installation was done correctly.
An oversized unit in a small space will short-cycle and never run long enough to dehumidify the air properly. An undersized unit will run continuously and still fall short on the hottest days of the year. Neither situation shows up in the efficiency rating on the spec sheet. It shows up on the utility bill and in how the space feels.
We size equipment for the space rather than for the last unit that was there. When a replacement is being quoted, we go through the load calculation before recommending equipment, and we explain what the numbers mean in terms of how the system will actually run. That conversation happens on the call, before anything is scheduled.
A system that stops working when temperatures are up is not a situation to wait on. We take emergency calls for no-cool and no-heat situations every day from 8:30 AM to 10:00 PM. When you call, the situation gets scoped on the phone: what the system is doing, when it stopped, and what the equipment is. That lets us confirm what the visit covers before it is booked.
For properties where a tenant is in place or a business needs to stay open during the work, we work through the access and scheduling details on the call. The visit is confirmed with a clear picture of what will happen and what it costs before anyone comes out. We do not show up and figure it out on arrival.
Reach out and we will talk through the symptoms.
The price depends on what the fault turns out to be, what has to be reached to fix it, and whether a repair or a replacement is the right answer. Those are not things that can be settled before the diagnostic, but the process of arriving at a number is straightforward.
When you call, we go through the details of the job on the phone. You get a price before the visit is confirmed, and the call covers what that price includes. On installation and replacement work, you get a written scope before anything starts.
What moves a quote is the nature of the fault, the condition of the equipment, and the access involved. A refrigerant leak in an accessible location is a different job from one that requires pulling the coil. A thermostat swap is a different job from a control board replacement. We explain what the diagnostic found and what the repair involves before any work starts, so the price is settled before anything is scheduled.
Call (912) 742-8959 and ask what it covers. You get a straight answer.
We serve Montgomery and the communities around it, including Vernonburg, Skidaway Island, Isle of Hope, Dutch Island, and Thunderbolt. Calls from across Chatham County are welcome. The process is the same wherever the property is: a call, a conversation about the work, and a price before anything moves forward. Each service is described in more depth on our page listing every HVAC service.
If you are in one of the surrounding communities and want to confirm coverage, call (912) 742-8959 and we will check your address.
Older homes often have equipment that has not been serviced in years, ductwork that was never properly sealed, or additions that were never tied into the central system correctly. Those situations usually need a diagnostic conversation before a repair quote can be accurate, because the visible symptom is sometimes the result of a larger underlying issue. We go through that on the call before the visit is booked.
Yes. Call us and we will add the address to the schedule. We will confirm the equipment at the new property and what the maintenance visit will cover before it is added to the arrangement.
Yes. A system that is working harder than it should to reach the same setpoint will show up on the energy bill before it shows up as a comfort complaint. Common causes include a refrigerant issue, a dirty coil, or a duct leak that is sending conditioned air somewhere other than the living space.
Yes, for the period the old system is out and the new one is being installed and commissioned. For most replacements, that window is a single day. We go through the expected timeline when the job is scoped so you know what to plan for.
Call (912) 742-8959 any day between 8:30 AM and 10:00 PM.
We take emergency no-cool and no-heat calls and scope the situation on the phone so the visit is set up correctly before anyone comes out. Let us know what the system is doing and when it stopped, and we will work through the details with you.
The best time to call is before you have made that decision on your own. Once somebody has actually looked at the equipment, the answer is clear: the repair is straightforward and worth doing, the system is close enough to the end of its life that a replacement makes more sense, or something in between. That conversation happens on the phone and continues at the visit. We give you a straight picture of what the equipment is doing and what the options are.
We answer when you call. We explain the work. We leave it running right.
Call Pooler HVAC Company at (912) 742-8959. We are available every day from 8:30 AM to 10:00 PM.
Have a look at our whole service area. Also close at hand: Skidaway Island, Thunderbolt, Savannah.
Below is a quick look at the heating and cooling work we handle across Montgomery and Chatham County. Each service is listed with what the visit covers, who it fits best, and a practical note to help you decide what to schedule first.
Call us at (912) 742-8959 any day from 8:30 AM to 10:00 PM and we will walk through the details for your specific system.
| Service Type | What It Covers | Best For | What to Keep in Mind |
|---|---|---|---|
| High-Efficiency Central AC Replacement |
| Homeowners with an aging AC that is running constantly, losing efficiency, or facing a major repair | A higher SEER2-rated unit costs more upfront and less every month, which matters when the system runs eight or nine months a year in coastal Georgia |
| Thermostat & Smart-Control Installation |
| Anyone looking to improve temperature consistency or reduce energy use with programmable controls | A smart thermostat can make a noticeable difference in how evenly the system holds temperature through the day |
| Full System Installation & Replacement |
| Homeowners replacing an aging system or upgrading to a higher-efficiency unit | A load calculation ensures the replacement unit is sized for the actual space, not just matched to what came before |
Call us at (912) 742-8959 any day from 8:30 AM to 10:00 PM and we will talk through what the job involves, give you a clear price, and get it on the schedule.
(912) 742-8959